The Technology Shift to UV LED Inkjet Systems

There are two basic curing units used for curing UV inkjet prints: Mercury vapor UV lamps and UV LED curing systems. Mercury vapor lighting is an old technology, which has been around for at least a century. UV inks were originally developed for this type of lighting, which emits a broad spectrum of UV light. Mercury […] The post The Technology Shift to UV LED Inkjet Systems appeared first on Supply55 Blog.

http://blog.supply55.com/the-technology-shift-to-uv-led-inkjet-systems/

Time Out

While hard work is important, it is equally important to take time off… Are you working more now and enjoying it less? Many sign makers work a mentally and physically anguishing 50 to 60 hours a week. Some work even longer.   I’m going to give you a bit of advice that might get me into trouble […] The post Time Out appeared first on Supply55 Blog.

http://blog.supply55.com/time-out/

Optimal Application Temperature for Vinyl Graphics

To avoid problems with vinyl or any other pressure-sensitive material, carefully read the vinyl manufacturer’s technical data sheet. Product bulletins will usually contain all of the information you need, including application temperature range. The application temperature range for most vinyl films is usually between 50⁰ and 90⁰F (10⁰ to 32⁰ C). For some films, the minimum application temperature […] The post Optimal Application Temperature for Vinyl Graphics appeared first on Supply55 Blog.

http://blog.supply55.com/optimal-application-temperature-for-vinyl-graphics/

What Causes Ink Adhesion Problems?

When screen printing polycarbonate film, learn what causes ink adhesion problems. The $64 question is: what causes ink adhesion problems when screen printing polycarbonate film? While some have suggested moisture absorption as the culprit, the most likely candidate is exposure to UV light and oxygen. As the polycarbonate absorbs UV light, it excites the photons of the atoms, which in turn […] The post What Causes Ink Adhesion Problems? appeared first on Supply55 Blog.

http://blog.supply55.com/what-causes-ink-adhesion-problems-2/

What You Must Know When Plotter Cutting Heat Transfer Vinyl and Flock Films

Heat transfer materials are comprised of either polyurethane, vinyl or flock facestocks coated with a heat-activated adhesive, and laminated to a plastic release liner or carrier film. Using a plotter cutter to cut heat transfer vinyl is a little different than cutting pressure sensitive vinyl. Some problems have resulted from using a dull blade. Other […] The post What You Must Know When Plotter Cutting Heat Transfer Vinyl and Flock Films appeared first on Supply55 Blog.

http://blog.supply55.com/what-you-must-know-when-plotter-cutting-heat-transfer-vinyl-and-flock-films/

NEPATA S1000 High Performance Sheeter 40”

The NEPATA S1000 sheeter delivers world-class performance in a dedicated sheeting platform producing up to 5,000 A4 or ANSI letter sheets per hour. Engineered and manufactured in Germany to the highest quality standards, the NEPATA S1000 yields precise, accurate cuts across a wide range of flexible media, including: self-adhesive films, sandblasting films, vehicle wrap films, […] The post NEPATA S1000 High Performance Sheeter 40” appeared first on Supply55 Blog.

http://blog.supply55.com/nepata-s1000-high-performance-sheeter-40/

How to Make Vinyl Film Removals Easier and Faster

The process of removing vinyl films generally requires the use of  both heat and chemicals. Some removers contain hazardous chemicals, such as toluene, that can cause health problems. Before using any chemical remover, read the manufacturer’s MSDS sheet and instruction bulletin. Always wear the recommended safety equipment. When working with propane torches or heat guns, […] The post How to Make Vinyl Film Removals Easier and Faster appeared first on Supply55 Blog.

http://blog.supply55.com/how-to-make-vinyl-film-removals-easier-and-faster/